|
|
| |||||||||||
|
|
|
| ||||||
 |
WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov Click to see Why is this here?
As of August 2018 the State of California has changed the requirements of the “Prop 65” law. We now must list on our website any possible chemicals the can cause cancer, birth defects or reproductive problem.
As an example: ABS plastic contains styrene PVC wire insulation can contain Di(2-ethylhexyl)phthalate (DEHP) electrolytic capacitors can contain Ethylene glycol Brass can contain Lead flame retardant pc boards can contain Tetrabromobisphenol A (TBBPA) Aluminum alloys can contain Chromium To put it simply we are a small company and do not have the resources to test every single part, so we list every thing as hazardous. Please recycle all electronic parts responsibly and under no circumstance eat, drink or smoke these parts and wash your hands after touching! |
Product Reviews Click here to review this item | ||
| ||
 |
Very nice PM DC motor, great for physics experiments | |
| This is really a very nice motor with nearly ideal characteristics. Very little cogging! Starts at 1V and 200mA, no-load. Speed vs voltage is nearly a straight line and no-load current draw is constant 200mA up to 12V. I joined two of these as a motor-generator set using 1/8" shrink tube and the no-load generator output voltage was a constant 1V less than the motor input voltage from 2V to 12V input. Two of these plus a variable DC metered bench supply, laser tachometer, and handheld DVM (all available from MPJA) would make a great motor physics demo setup. Also of note is the presence of a 1/8" dia. 2mm long rear shaft that could be attached to an optical disk for position feedback. | ||
| - Hal CHAMBERLIN, TX | ||
