Quality oscilloscope probes with a BNC connector to match to most equipment. Max Input: 600V AC P/P + DC.
For field service, schools or shop.
40MHz PROBE: Bandwidth: 1X = >15MHz +-3db. 10X=>40MHz +-3db: Capacitance 1X = 46pF; 10X = 15pF, (+ scope input): Impedance: 1X= 1M ohm: 10X= 10M ohm. With ground lead & retractable hook tip, IC tip & BNC adapter tip. L: 1.2m WT: .2
Product:
60MHZ OSCILLOSCOPE PROBE
Quality oscilloscope probes with a BNC connector to match to most equipment. Max Input: 600V AC P/P + DC.
For field service, schools or shop.
60MHz PROBE: Bandwidth: 1X = >15MHz +-3db. 10X=>60MHz +-3db: Capacitance 1X = 46pF; 10X = 15pF, (+ scope input): Impedance: 1X= 1M ohm: 10X= 10M ohm. With ground lead & retractable hook tip, IC tip & BNC adapter tip. L: 1.2m WT: .2
Product:
100Mhz SCOPE PROBE
Quality scope probe with BNC connector to matches most equipment. For field service, school or shop. Bandwidth: 1X = >6MHz +-3db 10X=>100MHz +-3db. Capacitance 1X= 150pF; 10X = 14pF, (+ scope input). Max Input: 600VDC. With ground lead, retractable hook tip, pin tip with IC lead cover & std. cover. CE Approved WT: .17
Product:
200MHZ OSCILLOSCOPE PROBE
Quality oscilloscope probes with a BNC connector to match to most equipment. Max Input: 600V AC P/P + DC.
For field service, schools or shop.
200MHz PROBE: Bandwidth: 1X = >10MHz +-3db. 10X=>200MHz +-3db: Capacitance 1X = 46pF; 10X = 11pF, (+ scope input): Impedance: 1X= 1M ohm: 10X= 10M ohm. With ground lead & retractable hook tip, IC tip & BNC adapter tip. L: 1.2m WT: .2
Product:
50 OHM FEED THROUGH TERMINATOR
Connectors: BNC-M to BNC-F
Impedance: 50 ohms
Range: DC-1GHz
Max. Power: 1Watt
Feed through terminator used to terminate 50 ohm probes or cables to hi impedance input. WT: .1
Product:
20db FEEDTHROUGH ATTENUATOR TERMINATOR
Attenuation: 20db
Connectors: BNC-M to BNC-F
Impedance: 50 ohms
Range: DC-1GHz
Vswr: <1.5:1
Power: 1W
Feed through attenuator used with 50 ohm equipment WT: .2
Product:
10db FEEDTHROUGH ATTENUATOR TERMINATOR
Attenuation: 10db
Connectors: BNC-M to BNC-F
Impedance: 50 ohms
Range: DC-1GHz
Vswr: <1.5:1
Power: 1W
Feed through attenuator used with 50 ohm equipment WT: .2
Product:
6db FEEDTHROUGH ATTENUATOR TERMINATOR
Attenuation: 6db
Connectors: BNC-M to BNC-F
Impedance: 50 ohms
Range: DC-1GHz
Vswr: <1.5:1
Power: 1W
Feed through attenuator used with 50 ohm equipment WT: .2
Product:
3db FEEDTHROUGH ATTENUATOR TERMINATOR
Attenuation: 3db
Connectors: BNC-M to BNC-F
Impedance: 50 ohms
Range: DC-1GHz
Vswr: <1.5:1
Power: 1W
Feed through attenuator used with 50 ohm equipment WT: .2
Product:
34" MICRO CLIP TESTS LEADS
Pair of Red & Black test leads with Banana Plugs on one end and Micro clips on the other. L: 34" WT: .07
Product:
BNC TO TEST CLIP CABLE
RG-58U test cable with a molded strain relief BNC connector on one end and red & black test clips on the other. RG-58 cable is 3ft long with an additional 7" of red & black wire from a strain relief to the clips. For lab, shop or school. L: 40" WT: .3
Product:
BNC TO ALLIGATOR CLIP CABLE
RG-58U test cable with a molded strain relief BNC male connector on one end and red & black alligator clips on the other. RG-58 cable is 3ft long with an additional 4-1/2" of red & 8" of black wire from the strain relief to the clips.
Product:
TEST CABLE-BNC-M TO BANANA PLUGS
RG-58AU test cable with a molded strain relief BNC male connector on one end and red & black Stackable banana plugs on the other. RG-58 cable is 3ft long with an additional 8" of black lead & 4" red lead from a strain relief to the plug. For lab, shop or school. L: 40in WT: .14
Product:
5in. TEST LEAD BNC-F to MICRO CLIPS
Red & Black test leads with a molded BNC Female on one end and Micro clips on the other. L: 5" WT: .03
Product:
12" MINI CLIP LEAD SET
Handy set of 10 multi colored clip leads. 26 AWG leads 12" long , with insulated 27mm alligator clips on each end, 2 leads each in five colors. For shop or lab. L: 12" WT: .2
Product:
CLIP LEADS MEDIUM
Handy set of 10 multi colored clip leads. 26 AWG leads 12" long , with insulated 35mm alligator clips on each end, 2 leads each in five colors. For shop or lab. L: 12" WT: .14
Product:
CLIP LEAD SET LARGE
Handy set of 5 multi colored clip leads. 24 AWG leads 14" long , with insulated 45mm alligator clips on each end, 1 lead each in five colors. For shop or lab L: 14" WT: .13
Product:
6pc. BATTERY CLIP LEAD
Handy set of 6 multi colored clip leads. 24 AWG leads 12" long , with insulated 40mm mesh jaw clips on each end, 1 lead each in six colors. For shop or lab. L: 12" WT: .17
Product:
18AWG CLIP LEAD SET
Handy set of 2 Red, 2 Black & 1 Green clip leads. 18 AWG leads, 20" long , with insulated alligator clips on each end. For shop or lab. L: 20" WT: .2
Product:
RED MINI TEST HOOKS
Red beryllium copper test hooks designed to clip to component leads leaving your hands free. 1-1/2" probe length, 2-1/4" long overall, 1/2" body Diameter. Add your own wire for custom lengths. WT. .005
Product:
BLACK MINI TEST HOOKS
Black beryllium copper test hooks designed to clip to component leads leaving your hands free. 1-1/2" probe length, 2-1/4" long overall, 1/2" body Diameter. Add your own wire for custom lengths. WT. .005
Product:
36in. TEST PROBE SET
General purpose, pair of red and black test probes, 36in leads with banana plugs on one end nickel plated brass probe on other.
Product:
RED/BLACK TEST LEADS PIN PLUGS
General purpose, pair of red and black test probes, 30in leads with pin plugs on one end and semi-flexable 4" handle with 7/8" nickel plated brass probe on other.
Product:
50mm EX-LARGE ALLIGATOR CLIP RED
Alligator clips with Red Vinyl boot. Solder or crimp. mm listed is length of metal clip. L: 50mm WT: .013
Product:
50mm EX-LARGE ALLIGATOR CLIP BLACK
Alligator clips with Black Vinyl boot. Solder or crimp. mm listed is length of metal clip. L: 50mm WT: .013
Product:
RED/BLACK 7ft. CLIPLEADS
7ft long SPT-2 18AWG ZIP cord. Black with wide Red stripe. Each end has 2" alligator clips with Red & Black covers. L: 7ft. WT: .3
Product:
RED & BLACK MINI BANANA CLIP TEST PROBES
General purpose, pair of red and black test probes, 26in leads with Mini right angle, banana plugs on one end nickel plated brass probe on other. L: 26" WT: .06
