USED large telephoto lens. Adjustable 75-150mm. Auto/Manual appature ("F" ) adj. In manual it is set at 16, in auto it has ranges from 4.5 to 16. Appature is adjusted by small lever on back of lens. Non standard mounting DIA: 4-5/8 L: 6-3/4 WT: 6.1
Product:
FRONT SURFACE MIRROR
Because of their low distortion; front surface mirrors are used for laser scanners and other optical equipment. Made of 1/8" flat plate glass. May have some slight imperfections
PLEASE REMOVE "PINK" PROTECTIVE FILM FROM FRONT SURFACE BEFORE USING L: 4-1/2" W: 1-1/8" T: 1/8" WT: .55
Product:
MIRRORED LENS FUJI OPTICAL
Fuji convex glass lens assembly with mirrored back. F 7.2 with focal length of 187mm. Image enters lens then is reflected back out thru lens. Flat field corrected. Used for copy machine & laser printers. 1/4" mounting flange. Dia: 3-1/2" T: 1-3/4" WT: .8
Product:
DENTAL MIRROR END
Magnifying dental mirror designed to screw into the end of a tool handle. Sorry we don't have the handle but the thread appears to be 2-56. Stainless steel body with glass mirror. 3/4" Dia. X 1-3/4" overall length.
Product:
COPY MACHINE LENS
40mm lens assembly with plastic barrel & glass elements. We think that were used in color copy machines?? Focal length approximately 8in. Internal red filter for correcting for incandescent lamp ?? L: 2-3/8" Dia: 2-3/16" WT: .5
Product:
DUAL FRONT SURFACE MIRROR ASSEMBLY
Removed from new equipment. Assembly with 2 front surface mirrors that measure 6-1/4" X 1" X 3/16" thick.
Steel frame with plastic hardware. Removeable mirrors held in place by spring clips & glue. L: 8-3/4" O/A W: 2-1/2"O/A H: 2" O/A WT .6
Product:
COPY MACHINE LENS
Used lens assembly with metal barrel & glass elements. These were made for copy machines. Adjustable Iris/f4.5 to greater than 8, Focal length 8-1/2in. Removable 5-3/4" X 4" aluminum bracket. L: 3" DIA: 2-7/8" WT: 1.6
Product:
12in. FRONT SURFACE MIRROR
Front surface mirror made by OCLI for laser photo printers or copiers. Minimum reflectivity greater than 85%
10mm thick plate glass for durability.
Mirror shipped with protective plastic Film on front surface L: 12-1/2" (320mm) W: 1-15/16" (50mm) T: 3/8" (10mm) WT: .7 Shp. Wt. 1
Product:
5" X 6-3/4" FRONT SURFACE MIRROR
Large low distortion; front surface mirrors are used for laser scanners and other optical equipment. Made of 1/8" flat plate glass. May have some slight imperfections.
NO PROTECTIVE FILM HANDLE CAREFULLY L: 6-11/16" W: 5-1/8" T: 1/8" WT: .4
