|
|
 |
Home > Test Equipment > Test Equipment
Test Equipment
 |
|
|
Product:
NETWORK CABLE TESTER
|
|
Test 10BaseT, Token Ring, EIA/TIA-568A/B Coax & Multi-Pair Cables. 2 part system allows testing of installed lines with remote end. Instant diagnosis for opens, shorts, miswires, split pairs etc. LEDS indicate status. BNC Female & RJ-45 test Jacks. 9V battery powered. Includes zippered cloth pouch.
WT: .52
|
|
|
|
|
Product:
TALKING LAN TESTER 3M
|
|
MFG: 3M CORP.
P/N: DT-1000
Talking tester checks for shorts, opens in 1,2 & 4 pair cables as well as 50/75 ohm coax cables.
Top panel RJ-jacks accepts 4/6/8 pin MOD connectors. 12 "F" connectors in end for Coax cables. Unit responds to test button with "OPEN" "SHORT", or "GOOD"
Red & Green LEDs for cross wired cables.
Requires 9V battery (not Included) Protective rubber overcase. UL/canada/usa listed
L: 4-5/8" W: 2-3/4 T: 13/16 WT: .6
|
|
|
|
|
Product:
WIRE & CABLE TRACER
|
|
Two part cable tracer with 2 test leads & a 4 conductor MOD cable. Tone generator sends signal into cable that can be traced by probe. Generator features: color LED for Phone line polarity, continunity and voltage testing. 30in Red& Black leads, 12in Phone cable, Mode switch. Probe features: Non-conductive, inductive tip, Adj. volume level, Probe works with most existing tone generators. Both use 9V batteries. Includes zippered cloth carry pouch.
WT: .5
|
|
|
|
|
Product:
FIBER OPTIC CABLE TESTER
|
|
2 piece unit allows testing of installed lines.
Receiver displays signal level.
Test Wavelength: 1300nM.
Fiber Core: 62.5/125uM (Multimode)
Range: -20~-40dbm also " HI" &" LO" when outside range
Termination: ST Female
Requires 9V battery for each unit (Not Supplied).
Includes zippered cloth case.
L: 4-1/2" W: 2-1/2" T: 1" WT: .5 (pair)
|
|
|
|
|
Product:
NON CONTACT INFRARED THERMOMETER
|
|
Pistol grip type, Non-contact infrared digital thermometer with LASER pointer and Auto Hold, Auto Turn Off, selectable "F" or "C" display, max-min & Ave. Includes soft sided woven case. CE listed.
Display: 3-1/2 digit Backlit LCD
Detection Range: 8-14um
Range: -4 "F" to +999 "F" ( -20 "C" to 537 "C")
Selectable "F" or "C"
Accuracy: -20 "C" ~ 50 "C": +- 2.5 deg. "C"
51"C" ~537 "C": +- 1% of reading +1 deg.
Resolution: .1Deg.
Sample Rate: approx. 1/Sec while holding Trigger
single shot per trigger pull
Distance Factor: 12/1 (at 12" spot size is 1")
Emissivity Factor: fixed @ .95
Power: 9 VDC battery
L: 6-3/8" W: 2-1/4" H: 7-1/2” O/A WT: .7
|
|
|
|
|
Product:
LASER DIGITAL TACHOMETER
|
|
Hand held photo reflective tachometer uses LASER beam. 5 digit LCD display measures RPM from 2.5-99,999. Resolution: .1RPM /2.5-999, 1RPM/above 1000. Features Hi/Lo/ Last reading memory. Powered by 4 “AA” cells or included 120VAC adapter. Requires reflective area on a non reflective surface.
L: 6-1/2" W: 3" T: 1-1/2" Shp. WT: 1.52
|
|
|
|
|
Product:
DIGITAL PHOTO TACHOMETER
|
|
Hand held photo reflective tachometer uses ambient lighting. 5 digit LCD display measures RPM from 5-99,999 with auto range select. Resolution: .1RPM <1000, 1RPM/above 1000. Features Hi/Lo/ Last reading memory. Powered by 4 “AA” cells or included 120VAC adapter. Requires reflective area on a non reflective surface.
|
|
|
|
|
Product:
TV & MONITOR TESTER
|
|
Model PG-16 Light weight multifunction, hand held test set for TV & computer monitors. Tests VGA, Super VGA Mac monitors & TV's. Provides: Color bars, Cross Hatch, Dots, Color Raster, windows and circle. DB-15 & DB-15HD, for computer monitors. RCA jack & full size 5 pin DIN for video & S-video. 9V battery powered. Simple set up. 9V battery powered
SPECIFICATIONS
Computer Monitor Types
PC.Mac,8514/A,
Test Rates:
Mon. -----Horiz----- ---Vert---
Type KHz Polarity Hz Polarity RES.
VGA1 31.5 + 70 - 640 X 350
VGA2 31.5 - 70 + 640 X 400
VGA3 31.5 - 60 - 640 X 480
SVGA 35.2 + 56 + 800 X 600
8514A 35.5 + 87 + 1024 X 384
VESA 48.5 - 60 - 1024 X 768
VESA 64.2 + 60 + 1280 X 1024
VESA 81.0 + 65 + 1600 X 1200
MAC1 35.0 - 67 - 640 X 480*
MAC2 35.0 - 67 - 640 X 480*
MAC3 35.0 - 67 - 640 X 480*
MAC4 49.7 - 75 - 830 X 624*
* Mac 1: Composite sync
2: Sync on Green
3: Separate Sync
4: Composite Sync
TV Monitor Testing
Scanning: Interlace
Composite Video 1.2VP/P @ 75 ohms
S-Video: .75V P/P Chrominance
1V P/P Luminance + Sync
|
|
|
|
|
Product:
25A CROCODILE CLIP
|
|
Bright steel, spring loaded clips. Designed for small battery chargers used for lawn mowers, motorcycles, etc. Small screw for wire terminal or lug.
L: 2-3/4" WT: .04
|
|
|
|
|
Product:
50A CROCODILE CLIP
|
|
Bright steel, spring loaded clips. Designed for medium battery chargers used for lawn mowers, motorcycles, cars, etc with standard sized terminals. Small screw for wire terminal or lug.
|
|
|
|
|
Product:
LCD TEMPERATURE METER & PROBE
|
|
Compact LCD panel mount temperature meter. Range -50 to +119.9 Deg. "F". 12mm character height. 4ft cord connects display to the temperature probe. Requires 1 "LR1130" button cell. (Not included). 4 corner mtg. holes.
L: 2-3/8" H: 1-3/16" T: 5/16" WT: .07
|
|
|
|
|
Product:
2MHZ FUNCTION GENERATOR/DISPLAY
|
|
MFG: Instek
Model: GFG-8020H
Power: 100/120/220/230VAC 50/60Hz
Accessories: AC Cord, Alligator Clip cable, Manual
Bench top Function generator covers .2 Hz to 2MHz in 7 switch select ranges. separate Course & Fine controls. Built in 4digit display of output frequency. Folding handle. CE Listed
OUTPUTS:
Connections: BNC-F TTL(CMOS) & BNC-F 50 ohm
Waveforms: Sine,Triangle,Square,TTL Pulse, CMOS
Switching Time: TTl: <30nS
CMOS/Square : <120nS
Level: >20Vp-p Open Circuit
>10Vp-p 50Ohm load
+3V Fixed TTL
4V(+-1V)-14.5V (+-.5V) Adj. CMOS
Attenuator: Selectable 20db
DC Offset: <-10V to >+10V Open/ -5Vto +5V 50 ohms
Duty Cycle: (Square & Pulse only) 1/1 (50%)-10/1 with
invert function
VCF INPUT:
Connection: BNC-F
Impedance: ~10K ohms
Control: 0-10VDC for 10:1 Frequency change.
COUNTER: (Internal use only)
Display: 4 Digit LED
Resolution: 0.1Hz/1Hz/10Hz/100Hz/1KHz
H: 3-3/4" W: 9-1/8" D: 11" WT: 4.7
Generator & Accessories Shp: WT: 5.9
Data Sheet
|
|
|
|
|
Product:
CLOSE FOCUS INFRARED THERMOMETER
|
|
Hand held, Highly advanced, Close focus, non-contact, I/R temperature meter. Bright Red Class II Dual lasers "Spot-On" aiming for accurate measurements.
Measure the temperature of components, skin and other close surfaces as small as .1in. with pinpoint accuracy
MFG: ZYTEMP
P/N: TN01U
Range: -55 "C" to +220 "C" (-67 to 428 "F")
Features:
Large Multi-function Backlit LCD display
Selectable degree F or C readout
3 Digit Temp. readout
Min/Max measurements
Stopwatch
Realtime Clock
Specifications:
Focus: 18mm (.7")
Measurement Spot Size: 2.5mm (.1") @ .7in.
Emissivity: Adj. 0.05-1.00 factory Preset at .95
Accuracy: +-2%/+-2Deg. Whichever is greater
Display Resolution: 0.1 "C" (.1 < 199.9 /1>200)
Response Time: 1Sec.
Power: 2 "AAA" Cells (Approx. 18hr. continious use)
L: 6-3/4" W: 1-1/2" T: 1" WT: .3 Shp. WT: .51
|
|
|
|
|
Product:
COAX CABLE TESTER
|
|
Coaxial cable tester for testing cables with BNC or TNC connectors. Instant diagnosis for opens and shorts.LEDS indicate status. 9V battery powered. Includes a TNC & a BNC cable terminator for remote end of cable
WT: .3
|
|
|
|
|
Product:
NETest NETWORK TESTER
|
|
|
|
|
|
|
|
|
|
|
|
