|
|
 |
Home > Counters & Timers
Counters & Timers
 |
|
|
Product:
24VDC RUNNING TIME METER
|
|
ENM T33 series low power, Non-Resetable Time meter. 7digit, crystal contolled impulse counter. Black Face with White & Red numbers, Max 99999.99 hrs. 24VDC Operation, 10mW draw. Snap-in, front mounts in 1.18" X .51 cutout.
11" leads
W: 1-1/4" H: 9/16" D: 1-7/16" WT: .05
|
|
|
|
|
Product:
0-99 "DELI" COUNTER KIT
|
|
DO IT YOURSELF "Deli" Counter kit.
Kit contains a 0-99 Up counter board/display assembly, power supply and a pushbutton Switch.
Just about any momentary type contact will operate the counter.
You supply a case, solder and labor to solder the power supply & switch to the attached leads.
2-3/4" tall super brite Red LED digits.
Each contact closer causes counter to increase 1 count.
There is no reset function, and unit will remember last count for a couple days so to get to "00" you must complete the count.
Display: W: 5" H: 4-3/16"
Driver: W: 4-5/16" H: 2"
WT: .5
|
|
|
|
|
Product:
24VDC IMPULSE COUNTER
|
|
TAMURA ot 6 Digit, non-resettable 24VDC impulse counter. Plastic case snap-in mounts into a 1" X 17/32" cutout. 4in. leads. All are set around 999XXX to allow testing of equipment once installed.
|
|
|
|
|
Product:
24VDC PULSE COUNTER
|
|
HANG ZHOU P/N DJ625, non-resettable, 6 Digit, impulse counter. Rated 24VDC/.6W/10CPS. Plastic case snap-in mounts into a 1" X 17/32" cutout. 12in. leads. All have a couple of test counts on them.
|
|
|
|
|
Product:
24VDC 6DIGIT IMPULSE COUNTER
|
|
TAMURA E630 6 Digit, non-resettable impulse counter rated: 24VDC, 2W, 10CPS. Plastic case Base mounts 2in. leads to 4 Pin Connector. All are set to "0"
W: 1-3/16" H: 39/64" D: 2" WT: .16
|
|
|
|
|
Product:
10 MIN. MECHANICAL TIMER
|
|
Robertshaw 10min. timer. SPST contacts rated 20A Resistive, 1/3hp @ 120/240VAC. Contacts close when you turn the shaft, times out from what you set. (Min. approx. 1min). 1/4" Dia. double flat, split shaft 11/16" long. Back of panel mounts with two 4-40threaded inserts. .250" quick connect terminals.
Dia: 2-1/4" D:1-1/2" (Exc. Shaft) WT: .12
|
|
|
|
|
|
|
|
|
|
