|
|
 |
Home > Components > Chokes & Filters
Chokes & Filters
 |
|
|
Product:
20 COND. FLAT CABLE NOISE FILTER
|
|
Fair-Rite Snap-On, ferrite filters. Clamps on ribbon cable up to 1" wide & up to .05"thick (20 conductor). Type 43 material blocks noise frequencies from 1MHz to100MHz. Permeability=1000, impedance: 77 @ 25MHz 225 @ 100MHz. Peel-n-stick mounting tape on back.
|
|
|
|
|
Product:
BUCKING CHOKE
|
|
Sony TS-740 bucking coil. Designed to go in series with the AC lines. 2 counter wound coils on a common powered iron core. A spike or noise that is common to both sides of the line is effectively cancelled out. 1A max current.
|
|
|
|
|
Product:
FLAT RIBBON CLAM SHELL FILTER
|
|
Fair-Rite P/N #0443166651 Snap-On, ferrite filters. Clamps on ribbon cable up to 1.3" wide & up to .05"thick (24-26 conductor). Type 43 material blocks noise frequencies from 1MHz to100MHz. Permeability=1000, impedance: 77 @ 25MHz 225 @ 100MHz.
L: 1-1/4" W: 1-7/8" H: 5/8"
|
|
|
|
|
Product:
1" HI PERM. TOROID CORE
|
|
1" O/D Uncoated toroid. Fair-Rite P/N 5975001301, High PermeabilityType 75 MnZn material. Flux Density: 4300 Gauss, Core Constant: 20, Inductance Factor: 3140nH, Effective Path Length: 6.2cm. For Broadband & Pulse transformers.
O/D: 1" I/D: .610" T: .25" WT: .02
|
|
|
|
|
Product:
SNAP-ON FERRITE NOISE FILTER
|
|
Fair-Rite P/N 0443167281ferrite snap-on filters. Plastic case with type 44 split core material. Clamps around cable up to .4in Dia. and blocks noise. Frequencies from 30MHz to500MHz. Permeability=500,
impedance: 125 @ 25MHz
210 @ 100MHz
L: 1.55" W: .94" H: .94" WT: .08
|
|
|
|
|
Product:
50uH FILTER CHOKE
|
|
DALE IH-5-50uH/.03 ohm DC res./8A cont. high current filter chokes. 1in. Radial tinned leads for P.C. mount.
Rated: +-10% Ind. tol. , -55-+75O "C" operating temp. at full load.
L: 1" Dia. .84" WT: .07
|
|
|
|
|
Product:
150uH 7A DALE FILTER CHOKE IH-5
|
|
DALE IH-5-150uH/.06 ohm DC res./7A cont. high current filter chokes. 1in. Radial tinned leads for P.C. mount.
Rated: +-10% Ind. tol. , -55-+75deg. "C" operating temp. at full load.
L: 1.6" Dia. .9" WT: .11
|
|
|
|
|
Product:
10uH 9A fFILTER CHOKE IH-3
|
|
DALE IH-3, 10uH/.018 ohm DC res./9A cont. Series high current filter chokes. 1in. Radial tinned leads for P.C. mount. Rated: +-10% Ind. tol. , -55-+75O "C" operating temp. at full load.
L: 1" Dia: .63 WT: .03
|
|
|
|
|
Product:
6A/250V POWER INLET & RFI MODULE
|
|
POWER DYNAMICS HGN-365-6M-F1, Flange mount, power inlet/RFI Filter. Rated: 6A @ 125/250VAC. Standard male 3 blade IEC cord connector and fuse holder. .250 quick connect output terminals, 5 X 20mm type fuse. UL/CSA listed.
W: 1-3/4" H: 1-3/8" D: 2-1/4" WT: .17
Data Sheet
|
|
|
|
|
Product:
6A POWER INLET & FiILTER
|
|
DELTA 06DENG3B-R, Snap-in, power inlet/RFI Filter. Rated: 6A @ 125/250VAC. Standard male 3 blade IEC cord connector. .250 quick connect output terminals, UL/CSA /VDE listed.
W: 1-1/4" H: 1" D: 2-3/8" WT: .1
|
|
|
|
|
|
|
|
|
|
