|
|
 |
Home > Magnets
Magnets
 |
|
|
Product:
SMALL CUBIC R/E MAGNET
|
|
Removed from new equipment. Strong rare earth (Neodymium) magnets. Roughly a irregular cube. All have a nickel plating that maybe chipped.
L: 9mm (3/8”) W: 7mm (9/32”) T: 6mm7/32”) WT: .001
|
|
|
|
|
Product:
GIANT FERRITE MAGNET
|
|
Removed from equipment. Large Ferrite magnet appears to be from some type of high power transmitter but we don't know. Epoxy coated.
L: 7-3/16" W: 2" T: 2-1/4" WT: 4.5
|
|
|
|
|
Product:
1-5/8" DIA. FERRITE MAGNET
|
|
Round ferrite magnet with a 3/8" Dia . hole in center and a couple of notches on both sides. As ferrite magnets go these are not real strong.
|
|
|
|
|
Product:
FERRITE BAR MAGNET
|
|
Moderate strength uncoated rectangular ferrite bar magnet.
L: 1-15/16” W: 3/4" T: 7/32" WT: .06
|
|
|
|
|
Product:
FERRITE MAGNET ASSEMBLY
|
|
Pair of Ferrite magnet assemblies each containing 2 trapazodial magnets between 2 steel plates supported by steel spacers. Each magnet is 1/4" Thick X 5/8"tall X 3/4" wide (max).
L: 2-1/4" W: 1-1/8" T: 1/2" WT: .23
|
|
|
|
|
Product:
RUBBERIZED MAGNET LATCH
|
|
Rubberized magnet used as part of a cabinet latch. Counter sunk screw holes at each end with a slanted center section with a 1/4" Dia. hole for latch pin. Magnet is 1-1/2" X 1/2" wide X 11/32" thick (max).
L: 1-1/2" W: 1/2" T: 11/32" WT: .014
|
|
|
|
|
Product:
SMALL MAGNETIC CATCH
|
|
Southco magnetic latches. Black plastic,
snap-in case. 3 Sizes available. NO Strike Plates
Small: 15/16"W X 5/16"T for 7/8 X 1/4" cutout
|
|
|
|
|
Product:
MEDIUM MAGNETIC CATCH
|
|
Southco magnetic latches. Black plastic,
snap-in case. 3 Sizes available. NO Strike Plates
Medium: 1-1/2"W X 3/8"T for 1-7/16" X 5/16" cutout
|
|
|
|
|
Product:
HANDEL MAGNET 25 LBS LIFT
|
|
Magnet assemblies used to hold or retrieve steel objects. Cased magnets with metal handle
|
|
|
|
|
Product:
HANDLE MAGNET 50 LBS LIFT
|
|
Magnet assemblies used to hold or retrieve steel objects. Cased magnets with metal handle
Holds up to 50lb
|
|
|
|
|
Product:
HANDLE MAGNET 100 LBS LIFT
|
|
Magnet assemblies used to hold or retrieve steel objects. Cased magnets with metal handle
Holds up to 100lb
|
|
|
|
|
Product:
HANDLE MAGNET 150 LBS LIFT
|
|
Magnet assemblies used to hold or retrieve steel objects. Cased magnets with metal handle.
Holds up to 150lb
|
|
|
|
|
Product:
HANDLE MAGNET 225 LBS LIFT
|
|
Magnet assemblies used to hold or retrieve steel objects. Cased magnets with metal handle
Holds up to 225lb
|
|
|
|
|
Product:
RETREIVING MAGNET 40 LBS LIFT
|
|
Magnet assemblies used to hold or retreive steel objects. Cased magnets with Eye bolt for the attachment of rope, cable or as a hold down +for equipment.
12961-MG up to 40lb
|
|
|
|
|
Product:
RETRIEVING MAGNET 100 LBS LIFT
|
|
Magnet assemblies used to hold or retreive steel objects. Cased magnets with Eye bolt for the attachment of rope, cable or as a hold down +for equipment.
Holds up to 100lb
|
|
|
|
|
Product:
RETRIEVING MAGNETS 150 LBS LIFT
|
|
Magnet assemblies used to hold or retrieve steel objects. Cased magnets with Eye bolt for the attachment of rope, cable or as a hold down +for equipment.
Holds up to 150lb
|
|
|
|
|
Product:
RETRIEVAL MAGNET 225 LBS LIFT
|
|
Magnet assemblies used to hold or retrieve steel objects. Cased magnets with Eye bolt for the attachment of rope, cable or as a hold down for equipment.
Holds up to 225lb
|
|
|
|
|
Product:
100 MINI RUBBER MAGNETS
|
|
Very small rubberized magnet possibly used with hall effect sensors as position sensing. These magnets are only 20mm long X 2mm wide with an adhesive backing. You receive a strip of 100pcs for one low price.
|
|
|
|
|
Product:
FERRITE "BUTTON" MAGNET
|
|
Uncoated ferrite magnet .7" dia X .2" thick. Medium strength.
Dia: .7" T: .2" WT: .013
|
|
|
|
|
Product:
2-3/4" DIA. CERAMIC RING MAGNET
|
|
Strong uncoated ferrite ring magnet with 1-1/4" dia. center hole.
Dia: 2-3/4" T: 7/16" WT: .46
|
|
|
|
|
Product:
5/16" Dia. RARE EARTH BUTTON MAGNET
|
|
Button shaped, nickel plated, strong, rare earth magnet.
Dia: 5/16" T: 1/8” WT: .003
|
|
|
|
|
Product:
DISK MAGNET 3/8n. X 1/16
|
|
Disc shaped, nickel plated, strong, rare earth magnet.
Dia: 3/8" T: 1/16” WT: .002
|
|
|
|
|
|
|
|
|
|
