|
|
 |
Home > Motors > DC Motors
DC Motors
 |
|
|
Product:
12VDC LONG SHAFT MOTOR-USED
|
|
MFG: BUHLER
P/N: 1.13.043.242.03
COIL: 12V/3.5ohms
USED DC motor Rated: 2300 RPM @ 12VDC NL, 4700 RPM @ 24VDC. 4mm dia. X 49mm steel front shaft. Front ball bearing, rear sleeve bearing. 3 M3 threaded mounting holes in front. 3" leads.
L: 3-1/8" (Body) DIA: 1-9/16” WT: .92
|
|
|
|
|
Product:
24VDC MOTOR & BELT DRIVE ASSEMBLY-USED
|
|
USED, Motor assembly with a 24VDC motor driving a COG belt & pulley that in turn drives Worm & gear assembly.
Approx. RPM @ 24VDC NL:
Motor: 3380, Worm gear: 1650, Spur gear: 116.
Plastic gears with steel shafts, Bronze sleeve shaft & motor bearings. PC board on motor terminals with noise filters. Steel frame, 5in. wire leads with ferrite filter. Included is Spur gear without a shaft that matches output spur gear.
Motor COG Belt Pully .478"
Jack Shaft COG Belt Pully: .975"
Jack Shaft: .309"
Output Spur Gear: .608"
loose Spur Gear: 1.527" O/D .320" I/D
L: 3-1/2" O/A W: 3-1/2"O/A H: 3-1/2" O/A WT: 1.2
|
|
|
|
|
Product:
12VDC/21RPM GEARHEAD MOTOR/TACH-USED
|
|
MFG: BUEHLER
P/N: 1.61.031.119.00
COIL : 12VDC
USED, 90Deg. Angled gearhead DC motor rated:
10/21/42RPM @ 6/12/24VDC,
300mA No Load/4.5A Stall @ 12V.
4ft/lb Stall torque @ 12V
Has 5VDC, TTL Compatable, 50Pulse/RPM Tach. mounted on rear. 8mm dia. X 50mm removable/reversable steel shaft held in place by a collet. Removable sheet metal mtg. bracket. 5" Tach leads, 8" motor leads.
L: 8-1/2" (OA) W: 4-1/4" H: 3" WT: 2.9
Data Sheet
|
|
|
|
|
Product:
RECIPROCATING MOTOR ASSEMBLY
|
|
Removed from new equipment, Motor assembly with a Buehler 1.61.046.520.01 Gearhead motor driving a reciprocating 4-7/8" removable plastic arm.
Stroke: 7/8"
115 Strokes/Min @ 6V/ 230 @ 12V/460 @ 24V
12 Slot Photo sensor on rear motor shaft, 2 Slot Photo sensor on Cam plate. Steel base plate.
L: 9-3/8" O/A W: 6"O/A H: 3" WT: 2
|
|
|
|
|
Product:
LEADSCREW MOTOR ASSEMBLY
|
|
Removed from new equipment, Motor assembly with a Buehler 1.61.046.531.00 Gearhead motor driving a 110mm (4-5/16") long lead screw. 85mm (3-1/4") Max travel, 4.3mm (1-11/16")/Rev.
Plastic travler with removable steel bracket.
Approx. 105RPM/6VDC,
~120mA @ 6V No Load/ ~150mA @ 12V No Load
~1A Stall @ 6V / > 2.5A Stall @ 12V
50 Slot Photo Tach. (5V powered) on rear motor shaft.
Steel base plate.
L: 9-3/8" O/A W: 6"O/A H: 3" WT: 2.3
Limited time only, while supplies last and subject to change at any time.
|
|
|
|
|
Product:
PICKER MOTOR-USED
|
|
USED Motor assembly with a Buehler 1.16.025.031.00 motor driving a 6 piece plastic gear train. Center driven, 6-7/8" long output shaft drives two 1-5/16"Dia. off center plastic cams attached near ends. Approx. 116 RPM @ 12VDC. 5-1/4" C/C distance on cams. We guess that it was part of a paper feed.
W: 6-7/8" O/A L: 3-1/2" H: 2-1/2" WT: .34
|
|
|
|
|
Product:
BUEHLER 12-24VDC MOTOR W/GEAR TRAIN
|
|
MFG: BUEHLER
P/N: 1.13.022.212.04
COIL: 12-24VDC
USED DC motor assembly rated:
Approx. 104RPM @ 24V, .05A NL,1.7A Stall
51 RPM @ 12V, .04A NL, .86A Stall
Motor assembly with brass worm gear driving two plastic gears. Last gear has a 5/16" Dia. X 5/16" plastic nib. to provide recripcating action. 1/2" radius of rotation on nib. Steel mounting bracket. 3" leads.
L: 5-1/4"(O/A) W: 3-1/4" (O/A) H: 1-3/4" WT: .62
|
|
|
|
|
Product:
6/12/24VDC/10/21/42 RPM GEARHEAD MOTOR
|
|
MFG: BUEHLER
P/N: 1.61.031.111.06
COIL : 12VDC
USED, 90deg. angled gearhead DC motor rated:
10/21/42RPM @ 6/12/24VDC.
300mA No Load/4.5A Stall @ 12VDC.
8mm dia. X 50mm Removable/Reversable steel shaft held in place by a collet. Removable sheet metal mtg. bracket. 5" leads.
L: 6-3/8" (OA) W: 4-1/4"(OA) H: 4-1/8" (OA)
WT: 2.8
|
|
|
|
|
Product:
12V @ 360RPM GEARHEAD MOTOR
|
|
MFG: BUEHLER
P/N: 1.61.046.112.00
COIL : 12-24VDC
Gearhead DC motor rated 700RPM @ 24V/360RPM @ 12V with 6oz/in torque load. 5mm dia. X 10mm flatted steel shaft. 3 metric (M3) threaded mounting holes. 3" leads.
L: 3-1/2" (Body) Dia: 1-3/8" WT: .56
|
|
|
|
|
Product:
12V/40 RPM GEARHEAD MOTOR
|
|
MFG: BUEHLER
P/N: 1.61.046.116.00
COIL: 12-24VDC
Gearhead DC motor rated 81RPM @ 24V/40RPM @ 12V 5mm dia. X 30mm steel shaft with a 20mm,16 tooth, plastic gear held by a roll pin. Removable heavy steel bracket & a non-removable cast metal secondary bracket with four 6-32 threaded mounting holes. 3" leads.
L: 3-1/2" (Body) Dia: 1-3/8" WT: 1.25
Limited time only, while supplies last and subject to change at any time.
|
|
|
|
|
Product:
12VDC/6.8RPM GEAR MOTOR
|
|
MFG: IGARASHI MOTORS (IGUSA)
P/N: Custom 2732-0300
COIL: 12V
Gear motor rated: 6.8 RPM @ 12VDC, .09A @ 12V No Load. 5mm (3/16”) dia. X 10mm (3/8”), flatted steel shaft, bronze bearings. Three M3-.5 threaded mounting holes in front. Solder terminals.
L: 2-11/16" (Body) Dia: 1-1/4" WT: .3
|
|
|
|
|
Product:
12VDC/17RPM MOTOR
|
|
MFG: ITT AUTOMOTIVE
P/N: 402.757
COIL: 12VDC
Gearhead DC motor rated 17RPM @ 12V/34RPM @ 24V. 6mm dia. X 18mm flatted steel shaft. Plastic gearcase with 4 corner mounting holes. 4" leads.
L: 3-1/4" (Body) W: 1-3/8" H: 1-1/2" WT: .44
|
|
|
|
|
Product:
18VDC140RPM MOTOR
|
|
MFG: BUEHLER
P/N: 1.61.065.344-4
COIL : 18VDC
Gearhead DC motor rated 140RPM @ 18V. 3mm dia. X 10mm flatted steel shaft. 3 mounting holes threaded M3. 7" wire leads.
L: 2" (Body) W: 1-1/8" H: 1-9/16" WT: .35
|
|
|
|
|
Product:
2.4VDC MABUCHI MOTOR
|
|
Mabuchi FF-N20PN DC motor rated 1.5-3.0VDC, 2.4V nominal. 15800 RPM, 96mA (no load) @ 2.4V, 1mm Dia. X 4mm shaft. Ideal hobby or toy motor.
L: 5/8" Dia: 1/2" WT: .009
|
|
|
|
|
Product:
SHICOH VIBRATOR MOTOR
|
|
Made by Shicoh Eng. for Ericsson cell phones. Small DC motor with removable rubber case. Solderable Gold plated slide contacts. Rated:1.3VDC @ 20mA running. 4mm dia X 22mm long motor without rubber mount.1.3V
L: 22mm O/A W: 8mm O/A H: 6mm O/A WT: .004
|
|
|
|
|
Product:
12V @ 225RPM GEARHEAD MOTOR
|
|
MFG: BUEHLER
P/N: 1.61.046.514.01
COIL : 12-24VDC
Gearhead DC motor rated:
450RPM @ 24V,.08A NL,1.5A Stall
225RPM @ 12V, .06A NL, .8A Stall
5mm dia. X 13mm flatted steel shaft. 3 metric (M3) threaded mounting holes. 3" leads.
L: 2-3/4" (Body) Dia: 1-3/8" WT: .4
|
|
|
|
|
Product:
12VDC 4600 RPM MOTOR
|
|
MFG: FUJI
P/N: FM-43E
COIL : 12V
4600 RPM @ 12VDC, 2800 RPM @ 6VDC. 4mm dia. X 10mm steel front shaft. 3 threaded mounting holes in front. 3" leads.
L: 3" (Body) DIA: 1-3/8” WT: .4
|
|
|
|
|
Product:
12V 120RPM COPAL GEARHEAD MOTOR
|
|
MFG: COPAL
P/N: LC37G-183
COIL: 12VDC
Removed from New equipment. Gearhead motor rated: 110RPM @ 12V or 220RPM @ 24V. 6mm dia. 27mm flatted steel shaft with metal gears. 3 corner mounting mounting holes. 5" leads. 1-7/8" X 1-5/8" mtg. flange.
L: 2" (Body) Dia: 1-15/16" (Body) WT: .4
|
|
|
|
|
Product:
13V 700 RPM BUEHLER GEARHEAD MOTOR
|
|
MFG: BUEHLER
P/N: 1.61.046.178.01
COIL : 13VDC
Gearhead DC motor rated 700RPM @ 13V no load/500RPM @ 13V with 6oz/in torque load. 5mm dia. X 11mm flatted steel shaft. 3 metric (M3) threaded mounting holes in front plate. 36" leads.
L: 2-1/2" (Body) Dia: 1-3/8" WT: .4
Limited time only, while supplies last and subject to change at any time.
|
|
|
|
|
Product:
24VDC 4000RPM MOTOR
|
|
MFG: BUHLER
P/N: 1.13.021.346
COIL : 24V
4000 RPM @ 24VDC. 2.5mm dia. X 15mm steel front shaft with press fit 5/16” mm dia. finc cog belt gear. 2.5mm Dia X 7mm flatted rear shaft. 4 unthreaded mounting holes in front. 3" leads.
L: 2-1/8" (Body) DIA: 1-3/16” WT: .32
|
|
|
|
|
Product:
23.5VDC 18RPM MOTOR
|
|
MFG: BUEHLER
P/N: 1.61.046.037.16
COIL : 23.5VDC
Gearhead DC motor rated 18RPM @ 23.5 V. 5mm Dia. X 21mm flatted steel shaft. 2 threaded mounting holes. 6" leads.
L: 2-3/4" (Body) Dia: 1-3/8" WT: .4
|
|
|
|
|
Product:
12/24VDC BUHLER MOTOR
|
|
MFG: BUHLER
P/N: 1.13.043.223.12
COIL: 12V
Rated: 1100 RPM @ 12VDC NL, 2140 RPM @ 24VDC. 4mm dia. X 20mm steel front shaft with pressfit 14mm dia. X 13mm 16 tooth brass gear. 3 M3 threaded mounting holes in front. 3" leads.
L: 3-1/8" (Body) DIA: 1-9/16” WT: 1
|
|
|
|
|
Product:
27VDC MIL. SPEC. DC MOTOR
|
|
MFG: NORTHFIELD ELECTRIC
P/N: 4250
NSN: 6105-00-500-4676
COIL: 27VDC
Old New Stock. Mil. type motor with aluminum case and removable bracket. 5/16" dia. 14tooth steel gear pressed on 5/16" long shaft. 10" leads
Rated; 16K RPM @ 27VDC, .3A
L: 2-1/2" DIA: 1-1/4" WT: .6
|
|
|
|
|
Product:
24VDC, 38RPM RIGHT ANGLE GEARMOTOR
|
|
MFG: VELEO
P/M 404.310
Coil: 24VDC
Heavy duty, gearhead DC motor Rated 38 @ 24V/.3A No load/4.5A stall. Internal 1 way clutch allows clockwise rotation (Shaft end). Free turns in CCW direction. Removable flatted ("D") steel shaft is 2" long X 5/16"dia. Removable sheet steel mtg. bracket.
L: 6-1/4" O/A W: 5" O/A T: 3-1/2" O/A WT: 1.9
|
|
|
|
|
Product:
24V, 360 RPM DC GEARHEAD MOTOR
|
|
MFG: BUEHLER
P/N: 1.61.046.526.03
COIL: 24VDC continuous
Gearhead DC motor rated:
360RPM @ 24V, .07A NL,1.2A Stall
170RPM @ 12V, .06A NL, .7A Stall
Oilless bronze bearings, 5mm dia. X 16mm flatted steel shaft. 3 metric (M3) threaded mounting holes. 10" leads.
L: 2-7/8"(Body) DIA: 1-3/8" WT: .4
|
|
|
|
|
Product:
SERVO MOTOR/TACH
|
|
MFG: JAPAN SERVO
P/N: DS48BT25-2
COIL: 6.4V/KRPM
USED, servo motor rated 6.4V per thousand RPM. 5.5mm dia. X 13mm steel shaft with press fit, 9/16" dia,16 tooth brass gear. Three 8-32 threaded mounting holes in front. AC output tachometer on back. 15in. leads.
L: 3-3/4" (Body) Dia: 2" WT: 1.5
|
|
|
|
|
Product:
24 V GEARHEADMOTOR -USED
|
|
Used, ITT Automotive, Right Angle, Reversible, gearhead motor. Rated:
24VDC, 440mA, 50 RPM, No Load /3.1A @ Stall Intermittent duty
12VDC, 350mA, 23 RPM, No Load /1.7A @ Stall
Hollow Plastic drive for 8mm Hex shaft (shaft passes through head)
Shaft Not Supplied
3 Right side mounting bosses (Metric) as viewed from gearhead end.
One .187" & one .250" quick connect trerminals.
L: 5-3/4" W: 3" O/A T: 1-1/2" WT: 1.25
|
|
|
|
|
Product:
13.6VDC JOHNSON TOOL MOTOR 6290RPM
|
|
Johnson 13.6VDC motor with Bronze sleeve bearings. Used in tools & appliances etc. 6290+RPM, .32A, no load, @ 13.6V. MaxTorque:6.15oz/in @ 13.6V/3.6A
1/8" Dia. X 5/8" serated steel shaft. Solder terminals.
2 mounting holes threaded M3 on front.
L: 2-3/8"(Body) Dia: 1-1/2" WT: .37
|
|
|
|
|
Product:
13.6VDC JOHNSON TOOL MOTOR 6100RPM
|
|
Johnson 13.6VDC motor with Bronze sleeve bearings. Used in tools & appliances etc. 6100+RPM, .44A, no load, @ 13.6V. MaxTorque:6.1oz/in @ 13.6V/2.8A
1/8" Dia. X 3/4" serated steel shaft. Solder terminals.
2 mounting holes threaded M3 on front.
L: 2-5/8"(Body) Dia: 1-1/2" WT: .47
|
|
|
|
|
Product:
24V DC JOHNSON MOTOR/BRASS GEAR
|
|
Johnson 24 VDC motor with Bronze sleeve bearings. Similar to HC685LG. Used in tools & appliances etc. 4600+RPM, /.08A, no load, 3A Stall @ 24V. 1/8" Dia. X 7/16" steel front shaft with 1/2" Dia. 14Tooth Brass gear, 1/8" Dia. X 5/16" rear shaft. Rear mounted removable circuit board with 4 Pin mini header and a PTC resetable fuse (1.3A hold). Two m3.3 tapped mounting holes in front.
L: 2-1/2" (Body) Dia: 1-1/2" WT: .6
|
|
|
|
|
Product:
12VDC MABUCHI RS-380PH MOTOR
|
|
MABUCHU 12VDC motor with Bronze sleeve bearings. Used in tools & appliances etc. 3300+RPM/.04A, no load/.7A Stall @ 12V.
2.3mmDia. X 14mm steel shaft. Two M2.6X 0.45 tapped Front mounting holes. Solder terminals.
L: 1-3/4" (Body) Dia: 1-1/16" WT: .16
Data Sheet
|
|
|
|
|
|
|
|
|
|
