Sound Level Indicator
|Item Number: 33596 MI|
|Small, USB Powered (5V), Ambient sound level indicator module.|
Built in Mike, micro-controller, 26 (2X13) Red LEDs. Adjustable sensitivity. 5V powered from a USB micro B connector.
Note: this is a level indicator Not a calibrated VU meter.
LEDs light in pairs.
L: 1-5/8” W: 5/8” H: 3/8” WT: .01
|visually appealing display, would like to know what max operating voltage is|
||13 segment level indicator
|I checked the thresholds by inputting mv of DC into pin 16 of the uP. At most sensitive setting, needed 80mv to solidly light the 1st LEDs, then 20mv more for each step. Sensitivity 2 required 2 times the mv, sensitivity 3 required 3 times the mv, etc. The mic had a 3 transistor amplifier to boost the audio to a higher level. True, this is not a DB meter, would work well to indicate the relative volume of a PA system. Soft speakers could get a visual feedback of their softness, and speak or sing louder so everyone could hear. I used 7of these to monitor surround sound speakers. I hope they get more in stock soon.|
|- RogerofLisle, IL|