Raspberry-Pi-2B Starter Set
|Item Number: 32670 MP|
|Raspberry-Pi-2B Controller with Heavy Duty Aluminum Case, Fan & Power Supply|
Full featured 32 bit, Raspberry-PI 2 Model B
This small card sized microcomputer Features: Broadcom’s BCM2836 SOC 900mHz processor,1GB RAM and VideoCore IV 3D Graphics core
Requires you to download an Operating System to your SD Card
Software: Full range of ARM GNU/Linux distributions
NOOBS, Raspbian, Pidora, Windows10 (Fall of 2015)
For details, instructions and downloads see below
Processor: 900MHz BCM2836RIFBG ARMv7
Power: 5VDC 1.8A Via a micro USB connector
depending on USB & Port loading.
I/O : 4 USB 2.0 Ports
1 Ethernet 10/100 Port
1 HDMI Port (Rev. 1.4)
1 3.5MM 4 conductor Audio/Video Jack
1 Camera Ribbon cable connector (CSI)
1 LCD Display Ribbon cable connector (DSI)
40 Pin header for SPI, & GPIO, UART, Power
Storage: Micro SD Card Slot (8GB min needed)
SD card stores Operating System
USB port: Type A female
Power Port: micro USB
L: 3” O/A W: 2-1/2” H: 3/4”
Industrial aluminum case
Case designed for End Use Applications in equipment, field, or factory. Micro fan mounts in case with double side tape and connects to 5V & ground on the Pi GPIO header.
Slot in case for I/O port wiring.
USB Ports, Network, A/V & HDMI ports available through case.
You cannot connect a 40 Pin Breakout Cable & the fan at the
S/D card Slot is not available through the case
Power Supply & Cable
Higher Output Supply and Adapter Cable for the Raspberry-Pi 2B.
Includes a 5V 4A regulated plug supply with a 5.5/2.1mm Plug and a mating 4-1/2in. adapter cable with a USB Micro B Plug for the Pi.
Starter Set Ship Wt: 1.1
Operating System Software Available:
Beginners should start with NOOBS (New Out Of Box Software)
Available Operating Systems:
Snappy Ubuntu Core
OPENELEC (XBMC Media Center)
RASPBMC (XBMC Media Center)
RISC OS (a Non LINIUX Based O/S)
Windows 10 (in development)