LED Strip Dimmer, 12-24VDC
|Item Number: 32760 MI|
|Enclosed mini wide range LED dimmer control uses PWM to vary the brightness of single color LED strips or boards. Adjustment pot on top.|
Terminal strips for Power & LED strip connections.
Output: 8A (96W)
Control Range: ~0%-99%LED Brightness.
L: 3-1/2” W: 2-3/8” H: 2-1/8” WT: .12
||Not 8Eight amps
|I have three of this units and they work as advertised, with the exception that they are not 8 amps, they are .8 amps making their output 9.6 watts at 12 volts dc. I run mine at 7 watts and have had no excess heating or flickering driving my led ceiling lamp in our small motor home. These units are an excellent value bearing in mind there limited wattage.|
|- Gordon Matter, TX|
||Works exactly as expected
|Dims a 5m LED strip from full brightness down to about 10% and then cuts out right at 0%. I used a 12v switched PS as input. I peeked inside, there is a controller board about 2x4cm with two 8-pin SMT chips and two 3-pin chips. Reversed polarity on input did not hurt it. Oops!|
|- Brian Wilson, CA|