Motors & Components, Electronic
12VDC, 30 RPM Gearhead Motor
Item Number: 32204 MD
Number of Reviews:
Out of Stock
Call 800-652-6733 for availability date
Gear motor rated: 30 RPM, 14Kg/cm Torque: 6mm dia. X 14mm flatted steel shaft, bronze bearings. Six M3x0.5 threaded mounting holes in front. Solder terminals
Good torque, good value.
This is a good motor and gear reduction, its not great. It has good torque but is somewhat noisy. My application is very low duty cycle, perhaps 30 seconds a day. The output shaft is a low quality bronze bushing and has some slop. One of the six M3 screw mounting points was bad, other 5 were fine. I expect long life with my low usage. Overall a good value and would purchase again. If you need higher precision spend more.
Works very well, Lots of torque.
Doesnt last very long
I bought 2 or more of these motors and the first time using it it stopped running less than 600 hours of op. Put in second motor and measured current draw, less than 450 mA so motor not overloaded if the 1.1 amp spec is real. Beware these may be factory seconds!
Copyright © 1997-2018 Marlin P. Jones & Assoc. Inc.
All Rights Reserved
Send mail to
with questions or comments
about this web site.
Site Designed by